Star Trac E-STe, Work Instructions

Page: 33 / 53

34
620-7925 Rev x1
Step 21.
Identify the four cables coming out of the neck
and mounting bracket:
1. Heart rate cable.
2. Main I/O cable.
3. Coax cable.
4. DC power cable.
Note: The coax and DC power cables are part of
the PVS and embedded kits and should be tucked
down the neck for possible future use.
1
2
3
4
Step 22.
Plug-in the 12-pin main I/O cable from the neck
into the new 12 pin adaptor.
Step 23.
Next, plug-in the heart rate cable from the neck
into the heart rate board connector on the dis-
play.
Step 24.
Plug back the Heart rate ground cable into the
quick disconnect tab on the display mount.