Service Manual: E-TR and E-TRi
10
Preventive Maintenance Schedule
This section provides a comprehensive list of factory recommended PM requirements, along with
detailed procedures for performing each task.
DAI LY
WEEKLY
MONT
HLY
AS NEEDE
D
Wipe down all surfaces including:
Display, handrails shroud and heart rate grips.
9
Clean under the running belt (soft cloth only)
9
Visually inspect running belt for alignment and tension
9
Ensure the power cord is not under the treadmill
9
Vacuum floor under and around treadmill
9
Inspect inside surface of running belt and top of deck
9
Correct any display or handrail squeaks and rattles
9
Visually inspect display panel (keypad) for wear
9
Vacuum inside shroud
9
Visually inspect the drive belt
9
Visually inspect the power cord for pinches or breaks
9
Wipe clean and lubricate elevation screws
9
Change belt and flip/new deck
9
Running belt & deck rewaxing
*
* *
*Running Belt & Deck Rewaxing
The Pro Tread models 7600 and 7700 are equipped from the factory with a “Waxless” running belt
and deck system. It is not necessary to regularly wax, rewax or lubricate the running belt and deck.
Wax may be applied to alleviate running belt noise (see waxing instructions).
Summary of Contents for Pro Tread AC 7600
