Service Manual: E-TR and E-TRi
13
MONTHLY
Clean
•
Unplug the treadmill and remove the
shroud. Use a portable vacuum with
dust attachment to clean any dust, dirt
or debris from inside the shroud area.
Use extreme caution to not damage
any components or knock and
connections loose
Inspect
•
Inspect the drive belt for tension and wear.
•
Inspect the power cord for pinches and/or
broken prongs
Lubricate
•
Wipe and debris from the elevation screws then lubricate. Use a spray lithium grease or a
thin coating of grease. Avoid thin lubricants (i.e. TriFlow
, WD-40
, or the like).
AS NEEDED
Belt Service
•
In high use locations, it may be advisable to replace the running belt with a new one to
prevent undetected wear. It is advisable to replace a running belt in a high use location in a
preventive manner, to prevent potential wear related issues. A worn or wearing belt can
cause undetectable issues.
Summary of Contents for Pro Tread AC 7600
