Star Micronics WinType 800C User Manual Download Page 61

Page: 61 / 76

Power supply

Power is not being supplied to the printer.

Check

Possible remedy

Is the printer turned ON?

Check to make sure that the power switch on the back
of the printer is in the ON [ ] position.

Is the AC adapter properly

Turn the printer OFF. Make sure that the power cable

plugged into the printer and

is securely connected and then turn the printer back

the electrical outlet?

ON.

Is the voltage correct?

Use only the AC adapter that came with this printer.

Printing

The printer doesn't print, or it stops printing.

Check

Possible remedy

Is the interface cable

Make sure that the interface cable is plugged securely.

connected securely?

Is the printer in the Ready

Make sure that the Ready lamp is lit. If it is flashing,

mode?

press it to enter the Ready mode.

Is paper jammed?

Make sure that there is no paper or other media
jammed inside of the printer. See page 46 for an
explanation on clearing paper jams.

Is the software you are

Check the installation settings in your software and re-

using properly installed

install it if necessary.

for your printer?

Is the proper media being

Special A4 media must be either manually fed or

used?

rework your data for A4 size.

The printed image has vertical lines.

Check

Possible remedy

Is the thermal head dirty?

Clean the inside of the printer. See page 41 for an
explanation of the proper way to clean the inside of
your printer.

The overall print is light.

Check

Possible remedy

Is the media surface too

Use only the recommended media with this printer.

rough?

See Chapter 3 for an explanation of the proper media
to use.

Summary of Contents for WinType 800C













































































Search results

Summary of Contents for WinType 800C

Reviews:

Related manuals for WinType 800C

Brands by name

Popular brands

Star Micronics WinType 800C, User Manual

Search results

Summary of Contents for WinType 800C

Reviews:

Related manuals for WinType 800C

Brands by name

Popular brands