Star Micronics LC-6211, User Manual

Page: 29 / 60

EDS Mode Settings 23
Paper Out
❏
Enable or disable the paper out detect function.
When paper out detection is set to
Enabled
, the printer automatically stops
printing whenever it senses there is no more paper. When set to
Disabled
, the
printer continues printing as long as there is data. Selecting Disabled makes it
possible to print right up to the bottom of a page, but it also creates the danger
of printing when there is no paper loaded in the printer, which can damage the
print head and platen.
Line Spacing
❏
Select the line spacing you want to use.
Strobe Timing
❏
Select the timing you want to use for receipt of data by the printer.
Selecting
Normal
allows the printer to receive data from the computer when the
parallel interface’s strobe signal falls. Selecting
Reverse
allows data receipt
when the strobe signal rises.
Print Mode
❏
Select the print mode you want to use.
Selecting NLQ provides near letter quality output, while selecting Draft
provides draft quality. Draft quality printing may be less attractive than near
letter quality, but the printing operation is faster.