Unparking fanfold paper
13
❏
Set the release lever on the back of the printer to the cut-sheet position.
The paper is now parked, and you can load cut-sheet paper into the printer
using the procedures under “Manual sheet feeding” on page 27.
Unparking fanfold paper
After you are finished printing on cut-sheet paper, use the following procedure
to unparkin fanfold paper and make it available for printing.
❏
If any cut-sheet paper is still in the printer, put the printer off-line and then
press the control panel’s
SET/EJECT/PARK
button to eject it.
❏
Check to make sure the printer is off-line.
❏
Set the release lever on the back of the printer to the fanfold position.
❏
Press the control panel’s
SET/EJECT/PARK
button. The printer
automatically feeds the fanfold paper back into position, ready for printing.
Using the tear-off function
The following procedure makes it easy to tear off fanfold paper without
disturbing the current position of the paper.
❏
Check to make sure that the printer is on-line.
❏
Press the control panel’s
SET/EJECT/PARK
button.
The printer feeds the perforation of the fanfold paper to the tear-off edge of
the printer cover.
❏
Tear off the paper.
❏
When you resume printing, the printer reverse feeds the paper to its former
position.
Summary of Contents for LC-6211
Page 1: ...USERS MANUAL LC 6211 HF 80825040 DOT MATRIX PRINTER ...
Page 6: ......