Entering the EDS Mode
21
Entering the EDS Mode
❏
Turn off the printer.
❏
Make sure that paper is loaded in the printer.
❏
While holding down the control panel’s
SET/EJECT/PARK
button, turn
the printer back on.
This causes the following message to be printed.
Note:
The paper is not fed after the message is printed, so you will have to open up
the printer’s front cover to read it.
❏
Press
SET/EJECT/PARK
to answer “Yes” or
LINE FEED
to answer
“No” for each option as it appears on the printout. Each time you reply,
printer prints the next setting.
❏
To jump to the next category at any time, press
ON LINE
.
❏
After you are finished making the EDS settings you want, hold down
ON
LINE
and press
LINE FEED
.
This exits the EDS Mode and registers all of the changes you have made.
Summary of Contents for LC-6211
Page 1: ...USERS MANUAL LC 6211 HF 80825040 DOT MATRIX PRINTER ...
Page 6: ......