-6-
(Installer Selectable Options CONT’D)
CONTROL HEAD OPTION JUMPERS
Five jumpers located inside the hand held controller can be used to select various
options. Review the chart below to determine if you want to change any of the
default settings.
Jumper
Standard Setting
(jumper on both pins)
Optional Setting
(jumper only on one pin)
S4 Timer
Push button S4 is a standard
ON/OFF button.
S4 used for Gun Lock - Stays
activated for only 8 seconds when
pressed.
Auxiliary Control
(
Horn vs. Manual)
The green auxiliary (AUX) wire in
the siren amplifier harness is
connected to the vehicle horn
ring, and activates the siren’s AIR
HORN for all siren modes except
RADIO.
AUX wire duplicates the function of
the MAN push button instead of the
HORN.
Momentary (S3)
Push button S3 is a standard
ON/OFF button.
S3 becomes a momentary switch,
thus only being active while being
held in.
Traffic Director
WARN Pattern
Auto-Activation With
Slide Switch
The WARN pattern on your Traffic
Director will auto-activate in slide
switch position 3 (L3)
TD WARN pattern auto-activated in
L1 or L2.
TD WARN pattern NOT activated in
L3
S4=S3+S2+S1
(LCS880 ONLY)
S4 is an independent switch
controlling output S4.
When pressed, S4 automatically
activates S3, S2, and S1 buttons.
Audible Beep
Disable
An audible beep is heard when
the buttons in the control head
are pressed.
No beep when the buttons in the
control head are pressed.
WAIL Tone
Auto-Activation With
Slide Switch
WAIL tone auto-activated in slide
switch position 3 (L3)
WAIL tone auto-activated in L1 or L2,
WAIL tone NOT activated in L3
Jumper
Standard Setting
Optional Settings
(Programmed with PROGRAM
jumper removed)
S4=S3+S2+S1
(LCS881 ONLY)
S4 is an independent switch
controlling output S4.
When pressed, S4 automatically
activates S3, S2, and S1 buttons.
Jumper Controlled Options
Programmable Options
(LCS881 ONLY)
