-4-
(Installer Selectable Options CONT’D)
The Park Kill (Cutout) Input turns off any siren tone output when activated, and
remains off until a control is activated or changed. The wiring diagram on page 13
shows two connection examples.
Connecting the white wire to positive (+12 VDC) normally activates the Park Kill
input. To instead have it activate when the white wire is connected to ground
(negative):
1. Turn “PK POS” DIP switch off.
2. Turn “PK NEG” DIP switch on.
Park Kill Input Polarity
Two-Tone
If desired, the Phaser sound can be replaced with a Two-Tone sound. This can be
done by turning on (up position) DIP switch #3 in the amplifier (labeled SW).
