Theta Controller
Programming
23
2.8.1.6
Setup: Manage Button (Step)
Manage Button (Step) Screens
Options Screen
Manage
enables step settings to be added, deleted and/or copied to the clipboard then pasted.
Add – Allows the addition of Smart Steps.
The Smart Step choices are Wobble, Slow
Seek and Self Tap. When added, they are
inserted into the correct position before the
audit step (Smart Step sequencing cannot be
altered). Wobble always occurs first followed
by Slow Seek, Self Tap, Pre-Torque then the
audit step and finally Backout. Smart Steps
are not required to run a tool strategy,
however, they may help. Add and modify the
appropriate Smart Step(s) for the application.
See section 2.8.1.1 Wizard Screens for a
description of the Smart Steps.
Delete – Removes selected step from tool
strategy.
Copy – Copies selected step to clipboard.
Paste – Overwrites selected step with
clipboard values. The clipboard information
must match the step for it to be successfully
pasted
2.8.1.7
Setup: Exit
Exit Screens
Options Screen
Programming changes are stored after exiting the current menu.
