Stanley STSC1618, Manual

Page: 12 / 44

12
ENGLISH
(Original instructions)
Specifications STSC1618
Voltage 220-240V
z H 0 6 / 0 5 y c n e u q e r F
Power
1600W
No-Load Speed 5500/min (rpm)
Maximum cutting depth 62mm AT 90°
46mm AT 45°
Technical Data
Service Information
STANLEY offers a full network of company-owned and
authorized service locations. All STANLEY Service Centers
are staffed with trained personnel to provide customers with
efficient and reliable power tool service. For more
information about our authorized service centers and if you
need technical advice, repair, or genuine factory
replacement parts, contact the STANLEY location nearest
you.
Circular Saw STSC1618
STANLEY declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN 60745-1:2009 + A11:2010,
EN 60745-2-5:20 1 0
These products also comply with Directive
2004/108/EC (until 19/04/2016) 2014/30/EU (from
20/04/2016) and 2011/65/EU. For more information, please
contact STANLEY at the following address or refer to the
back of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
STANLEY.
R.Laverick
Engineering Manager
STANLEY , Europe, Egide Walschaertsstraat14-18,
2800 Mechelen, Belgium
08.2015
EC declaration of conformity
MACHINERY DIRECTIVE
L
pA
(sound pressure) dB(A) 92,5
K
pA
(sound pressure uncertainty) dB(A) 3
L
WA
(sound power) dB(A) 103,5
K
WA
(sound power uncertainty) dB(A) 3
Vibration emission value a
h
(cutting wood)
a
h
= m/s² 6,6
Uncertainty K = m/s² 1.5
Vibration
The declared vibration emission values stated in the
technical data and the declaration of conformity have been
measured in accordance with a standard test method
provided by EN 60745 and may be used for comparing one
tool with another. The declared vibration emission value may
also be used in a preliminary assessment of exposure.
Warning! The vibration emission value during actual use of
the power tool can differ from the declared value depending
on the ways in which the tool is used. The vibration level
may increase above the level stated.
When assessing vibration exposure to determine safety
measures required by 2002/44/EC to protect persons
regularly using power tools in employment, an estimation of
vibration exposure should consider, the actual conditions of
use and the way the tool is used, including taking account of
all parts of the operating cycle such as the times when the
tool is switched off and when it is running idle in addition to
the trigger time.