Stanley SM16, Original Instructions Manual

Page: 24 / 104

ENGLISH (
Original Instructions)
24
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be dis-
posed of with normal household waste.
Should you find one day that your STANLEY product
needs replacement, or if it is of no further use to you, do
not dispose of it with household waste. Please sort it out
for separate recycling.
Separate collection of used products and packaging
allows materials to be recycled and used again. Re-
use of recycled materials helps prevent environmen-
tal pollution and reduces the demand for raw materials.
NOTES
STANLEY’s policy is one of continuous improvement to
our products and as such, we reserve the right to change
product specifications without prior notice.
Standard equipment and accessories may vary by country.
Product specifications may differ by country.
Complete product range may not be available in all coun-
tries. Contact your local STANLEY dealers for range avail-
ability.
SERVICE INFORMATION
STANLEY offers a full network of company-owned and/
or authorized service agents throughout your country. All
STANLEY Service Centers are staffed with trained per-
sonnel to provide customers with efficient and reliable
power tool service. Whether you need technical advice,
repair, or genuine factory replacement parts, contact the
STANLEY location nearest to you.
TECHNICAL DATA
MITRE SAW SM16
Voltage
V
AC
220~240
Frequency Hz 50-60
Power input W 1650
Blade diameter mm 254
Blade kerf thickness mm 2.8
Bore diameter mm 30
Max.blade speed min
-1
4800
Mitre (max. positions) left
right
47°
52°
Bevel (max. positions) left
right
45°
0°
0°mitre,0°bevel 75mmx140mm
45°mitre,0°bevel 75mmx95mm
0°mitre,45°bevel 48mmx140mm
45°mitre,45°bevel 48mmx95mm
Automatic blade brake time s <10.0
Weight kg 10.5
Level of sound pressure according to EN 62841:
Sound pressure (L
pA
) dB(A) 98,5
Sound pressure uncertainty (K
pA
) dB(A) 3
Sound power (L
WA
) dB(A) 109,0
Sound power uncertainty (K
WA
) dB(A) 3
NOISE
The declared noise emission values stated in the technical
data and the declaration of conformity have been
measured in accordance with a standard test method
provided by EN 62841 and may be used for comparing one
tool with another. The declared noise emission value may
also be used in a preliminary assessment of exposure.
WARNING! The noise emission value during
actual use of the power tool can differ from the
declared value depending on the ways in which
the tool is used. The noise level may increase
above the level stated.
When assessing noise exposure to determine safety
measures required by 2002/44/EC to protect persons
regularly using power tools in employment, an estimation
of noise exposure should consider, the actual conditions of
use and the way the tool is used, including taking account
of all parts of the operating cycle such as the times when
the tool is switched off and when it is running idle in
addition to the trigger time.