Stanley SDR1400, Original Instructions Manual

Page: 7 / 46

(Original instructions)
ENGLISH
7
This tool includes some or all of the following features.
1. Air vents
2. Handle (left & right)
3. Socket
4. Shaft
5. Stirrer
6. lock-on button
7. Variable speed switch
8. Power cord with plug
9. Mounting spanner 22mm (x 2)
VOLTAGE DROPS
Inrush currents cause short-time voltage drops. Under
unfavourable power supply conditions, other equipment may
be affected. If the system impedance of the power supply is
lower than 0.34 Ω, disturbances are unlikely to occur.
ASSEMBLY
Unpacking
• Unpack all parts and lay them on a flat, stable surface
• Remove all packing materials and shipping devices, if
applicable.
• Make sure the delivery contents are complete and free of
any damage. If you find that parts are missing or show
damage do not use the product but contact your dealer.
Using an incomplete or damaged product represents a
hazard to people and property Ensure that you have all
the accessories and tools needed for assembly and
operation. This also includes suitable personal protective
equipment.
WARNING! The product and the packaging are not
children’s toys! Children must not play with plastic
bags, sheets and small parts! There is a danger of
choking and suffocation!
Setup
WARNING! The product must be fully assembled
before operation! Do not use a product that is only
partly assembled or assembled with damaged
parts! Follow the assembly instructions step-by-step
and use the pictures provided as a visual guide to easily
assemble the product! Do not connect the product to power
supply before it is completely assembled!
Stirrer
WARNING! Stirrers are available in different types
and with different shape and diameters. Always use
the correct stirrer according to the intended use!
Observe the technical requirements of this product
(see section “Technical specifications”) when purchasing and
using stirrer! Stirrer becomes hot during use! Handle them
carefully! Wear protective gloves when handling stirrer in
order to avoid injuries like burns and cuts!
Attaching (Fig.B, Fig.C, Fig.D, Fig.E)
• Align the stirrer (5) with the shaft (4). Screw the stirrer (5)
clockwise onto the lower end of the shaft (4) (Fig. B).
• Lock the welded nut of the shaft (4) with one mounting
spanner (9) and secure the stirrer (5) clockwise with the
other (9) gripping the welded nut (Fig. C).
NOTE! Tighten the connection hand tight at first, before using
the spanners.
LABELS ON TOOL
The label on your tool may include the following symbols:
Position of date code
The date code, which also includes the year of manufacture,
is printed into the housing.
Example:
2017 XX JN
Year of manufacturing
PACKAGE CONTENTS
The package contains:
1 Mud mixer
1 Two section paddle
2 Wrenches
1 Instruction manual
• Check for damage to the tool, parts or accessories which
may have occurred during transport.
• Take the time to thoroughly read and understand this
manual prior to operation.
FEATURES (Fig A)
W ARNING! To reduce the risk of injur y, the user
must read the instruction manual before use.
Wear ear protection.
Wear safety glasses or goggles.
V Volts Direct Current
A Amperes n
0
No-Load Speed
Hz Hertz Class II Construction
W Watts Earthing Terminal
min minutes Safety Alert Symbol
Alternating
Current
/min.
Revolutions or
Reciprocation per
minute