Standard 3360DNP Operating Instructions Manual Download Page 68

Page: 68 / 233

Operation

Adjust the contrast with the

[

←

][

→

]

{{{{

}}}}{{{{

}

}}}}

keys.

Press the

[

]

key.

Note

❒

Use "High" to produce clear
prints of people's faces.

❒

Use "Low" to produce clear
prints of landscapes and
scenery etc.

DDDD

Select the dot pattern with the

[

←

]

[

→

]

{{{{

}}}}

{{{{

}

}}}}

keys.

Note

❒

Four dot patterns are available:
• Setting 1: clearest
• Setting 2: clearer than setting 3
• Setting 3: clearer than setting 4
• Setting 4: clearer than the

standard setting

EEEE

Press the

[

]

key.

FFFF

Place your original on the expo-
sure glass or in the optional docu-
ment feeder.

GGGG

Press the

{{{{

Start

}}}}

key.

HHHH

Check the image position on the
trial or proof print.

Note

❒

If the image position is not cor-
rect, adjust it using the

[

Image

]

key. See p.24 “Adjusting the Po-
sition of Printed Images”.

IIII

Make your prints.

Pencil Mode Printing

Note

❒

Originals written in pencil should
be placed on the exposure glass.

AAAA

Press the

[

Original

]

key.

Summary of Contents for 3360DNP










































































































































































































































Search results

Summary of Contents for 3360DNP

Reviews:

Brands by name

Popular brands

Standard 3360DNP, Operating Instructions Manual

Search results

Summary of Contents for 3360DNP

Reviews:

Brands by name

Popular brands