Standard 3360DNP Operating Instructions Manual Download Page 149

Page: 149 / 233

Optional Document Feeder

129

Note

❒

To avoid originals misfeeding,
fan the originals before placing
them in the document feeder.

❒

The originals are fed from the
top of the stack. Make sure that
the originals are placed in the
correct sequence with the first
on the top.

JJJJ

Press the

{{{{

Start

}}}}

key.

KKKK

Check the image position on the
trial or proof print.

Note

❒

If the image position is not cor-
rect, adjust it using the

[

Image

]

key. See p.24 “Adjusting the Po-
sition of Printed Images”.

LLLL

Press the

{{{{

Auto Cycle

}}}}

key.

Note

❒

In Auto Cycle mode, printing
starts automatically after a trial
print is delivered.

MMMM

Press the

{{{{

Print

}}}}

key.

Summary of Contents for 3360DNP










































































































































































































































Search results

Summary of Contents for 3360DNP

Reviews:

Brands by name

Popular brands

Standard 3360DNP, Operating Instructions Manual

Search results

Summary of Contents for 3360DNP

Reviews:

Brands by name

Popular brands