Standard 3360DNP, Operating Instructions Manual

Page: 58 / 233

Operation
38
1
Directional Magnification (Size)
Use this function to have the machine
select suitable reproduction ratios
based upon the dimensions of the
print you require and the size of the
original you specify.
1. Horizontal original size
2. Vertical original size
3. Horizontal print size
4. Vertical print size
Note
❒
You can enter sizes within the fol-
lowing ranges.
❒
The range of ratios which the ma-
chine can select depends on where
you place the original:
• On the exposure glass: 50-200%
❒
If the calculated ratio is over the
maximum or under the minimum
ratio, it is corrected within the
range of ratios automatically.
AAAA
Press the
[ Ratio ]
key.
BBBB
Select [ Mag. ] with the [
→
→ →
→
] or
{{{{ }
} }
} }}}}
key.
CCCC
Press the [ OK ] key.
DDDD
Select
[ Direct.Mag.(Size) ]
with the
[
→
→ →
→
] or
{{{{ }
} }
} }}}}
key.
EEEE
Press the [ OK ] key.
Metric ver-
sion 1 - 999mm (in 1mm steps)
Inch version 0.1" - 99.9" (in 0.1" steps)
1
3
2 4
CP2M01EE