Standard 3360DNP Operating Instructions Manual Download Page 162

Page: 162 / 233

User Tools

142

2. Set Operat'n Mode

Data Print

Use to print out the following data.

Note

❒

Available settings:

• Log Data (Number of prints made, how many times paper

misfeeds occur and so on.)

• Reset Counters (Number of prints and master made under

each user code.)

• Store Class (Registered number of students in each class.)

Energy Saving

You can set the time until the Energy Saver mode starts.

Note

❒

Default:

3 Min.

(minutes)

No.

Mode

Description

Min. Quantity

The minimum print quantity can be set between 0 and 9999.

Example: If you specify 20 as the minimum number of prints, runs
of 20 or more prints will be accepted, print runs of less than 20
prints will not be accepted.

Note

❒

Default:

Max. Quantity

The maximum print quantity can be set between 0 and 9999.

Note

❒

Default:

9999

CopyCount Dis-
play

The counter can be set to show the number of prints made (Up),
or the number of prints left to be made (Down).

Note

❒

Default:

Down

Panel Beeper

Turns the beeper on or off.

Note

❒

Default:

STD.

(standard)

❒

Available settings:
• ALL OFF (The beeper does not sound when you press keys

or when warning messages appear on the panel display.)

• STD. (When you press a key, the beeper does not sound.

When warning messages appear on the panel display, the
beeper sounds.)

• ALL ON (The beeper sounds when you press a key or

when warning messages appear on the panel display.)

LCD Contrast

You can adjust the brightness of the panel display.

No.

Mode

Description

Summary of Contents for 3360DNP










































































































































































































































Search results

Summary of Contents for 3360DNP

Reviews:

Brands by name

Popular brands

Standard 3360DNP, Operating Instructions Manual

Search results

Summary of Contents for 3360DNP

Reviews:

Brands by name

Popular brands