Standard 3360DNP Operating Instructions Manual Download Page 44

Page: 44 / 233

Operation

Adjusting the Position of Printed Images

Use the following procedure to adjust
the position of print images as re-
quired.

* Paper feed direction

Limitation

❒

For 308 mm, 12.2"-width paper,
you can only adjust the position of
the print image 5 mm, 0.2" up or
down.

Note

❒

When the main switch is turned
off, the position returns to the de-
fault.

AAAA

Press the

[

Image

]

key.

Note

❒

You can skip step

and adjust

the image position directly by
pressing the

{{{{

}}}}

{{{{

}

}}}}

{{{{

}}}}

and

{{{{

{

}}}}

keys.

BBBB

Adjust image position using the

{{{{

}}}}

{{{{

}

}}}}

{{{{

}}}}

, and

{{{{

{

}}}}

keys.

Note

❒

When you shift the image for-
ward, leave a 10mm, 0.4" mar-
gin at the leading edge. If there
is no margin, paper might wrap
around the drum and cause a
misfeed.

❒

The

{{{{

}}}}

and

{{{{

}

}}}}

keys shift the

image up to 15mm, 0.6" each
way in 0.5mm, 0.02" steps.

❒

The

{{{{

}}}}

and

{{{{

{

}}}}

keys shift the

image up to 10mm, 0.4" each
way in 0.5mm, 0.02" steps.

CCCC

Press the

[

]

key.

DDDD

Press the

{{{{

Proof

}}}}

key to check the

image position.

GRPOSI0E

Summary of Contents for 3360DNP










































































































































































































































Search results

Summary of Contents for 3360DNP

Reviews:

Brands by name

Popular brands

Standard 3360DNP, Operating Instructions Manual

Search results

Summary of Contents for 3360DNP

Reviews:

Brands by name

Popular brands