manualshive.com logo in svg

Standard 3360DNP, Operating Instructions Manual

Share
Download
Standard 3360DNP Operating Instructions Manual Download Page 6

ii

R

 

CAUTION:

 

•

Protect the machine from dampness or wet weather, such as rain, snow.

•

Unplug the power cord from the wall outlet before you move the machine. 
While moving the machine, you should take care that the power cord will not 
be damaged under the machine.

•

When you disconnect the power plug from the wall outlet, always pull  the 
plug (not the cable).

•

Do not allow paper clips, staples, or other small metallic objects to fall inside 
the machine.

•

For environmental reasons, do not dispose of the machine or expended 
supply waste at household waste collection points. Disposal can take place 
at an authorized dealer.

•

Be careful not to cut yourself on any sharp edges when you reach inside the 
machine to remove misfed sheets of paper or masters.

•

Our products are engineered to meet high standards of quality and function-
ality, and we recommend that you use only the expendable supplies avail-
able at an authorized dealer.

Summary of Contents for 3360DNP










































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands