manualshive.com logo in svg

Standard 1460, Owner'S Manual, Page: 68 / 128

Share
Download
Standard 1460 Owner'S Manual Download Page 68

PAGE A-8

TO SET THE TIME BASE

 1. PRESS   A (MENU)

 2. ENTER 3 DIGIT ACCESS

CODE

 3. PRESS   ENTER

YOU ARE IN THE Main Menu.

 4. PRESS   8

YOU ARE IN THE Set Defaults
MENU.

 5. PRESS  1

YOU ARE ASKED  TO ENTER
THE Time Base.

 6. PRESS:

1  FOR Line Frequency
2  FOR Oscillator

 7. PRESS  ENTER

YOU ARE RETURNED TO
THE Set Defaults Menu.

 8. PRESS  ESC  TWICE

YOU ARE RETURNED TO
THE DATE & TIME DISPLAY.

TO SET THE TIME FORMAT

TO SET THE LINE FREQUENCY

 1. PRESS   A (MENU)

 2. ENTER 3 DIGIT ACCESS

CODE

 3. PRESS   ENTER

YOU ARE IN THE Main Menu.

 4. PRESS  8

YOU ARE IN THE Set Defaults

MENU.

 5. PRESS  2

YOU ARE ASKED TO ENTER
A Time Format.

 6. PRESS:

1  FOR  12 HR.  FORMAT
2  FOR  24 HR.  FORMAT

 7. PRESS  ENTER

YOU ARE RETURNED  TO Set
Defaults  MENU.

 8. PRESS   ESC   TWICE

YOU ARE RETURNED TO THE
TIME & DATE DISPLAY.

1. PRESS   A  (MENU)

2. ENTER 3 DIGIT ACCESS

CODE

3. PRESS  ENTER

YOU ARE IN THE Main Menu.

4. PRESS  8

YOU ARE IN THE Set Defaults
MENU.

5. PRESS   3

YOU ARE ASKED TO ENTER
THE Line Frequency.

6. PRESS:

1  FOR 50 HZ LINE
    FREQUENCY
2  FOR 60 HZ LINE
    FREQUENCY

7. PRESS  ENTER

YOU ARE RETURNED TO THE
Set Defaults MENU.

8. PRESS  ESC  TWICE

YOU ARE RETURNED TO THE
TIME & DATE DISPLAY.

firealarmresources.com

Summary of Contents for 1460

































































































































Reviews:

No comments