Page 53
Phantom PS2000
11. Repeat step 10 as many times as necessary to com-
plete the MMSI code (nine digits).
12 Press and hold the [
CALL
(
SET
)
MENU
] key to store
the group address.
13. To enter another group address, repeat steps 5 through 12.
14. To exit this menu and return to radio operation mode press the [
16/9
] key.
VH-310 Handset:
1. Press and hold down the [
CALL
(
MENU
)] key until “
RADIO SETUP
” menu
appears.
2. Press the [
] key to select “
DSC SETUP
” menu,
then press the [
ENT
] key.
3. Press the [
] or [
] key to select “
GROUP DIR
”
menu, then press the [
ENT
] key.
4. Press the [
] or [
] key to select “
Add
.”
5. Press the [
ENT
] key to enabling this item.
6. Press the [
] or [
] key to select the first letter of
the name of the group you want to reference in the
directory.
7. Press the [
ENT
] key to store the first letter in the
name and step to the next letter to the right.
8. Repeat step 6 and 7 until the name is complete.
The name can consist of up to eleven characters, if you do not use all
eleven characters press the [
ENT
] key to move to the next space. This
method can also be used to enter a blank space in the name.
To clear the previous letter, press the [
H/L
] key.
9. After the eleventh letter or space has been entered, press
and hold the [
ENT
] key to advance to the MMSI (Maritime
Mobile Service Identity Number) number entry.
10. Enter the MMSI (up to nine digits) from the keypad. If a
mistake was made entering in the number, pressing the [
H/
L
] key to delete the wrong digit.
11 Press and hold the [
ENT
] key to store the group address.
12. To enter another group address, repeat steps 5 through 10.
13. To exit this menu and return to radio operation mode press
the [
16/9
] key.
Summary of Contents for PHANTOM Series PS2000
Page 83: ...Page 83 Phantom PS2000 MEMO...