Standard Horizon PHANTOM Series PS2000, Owner'S Manual

Page: 49 / 84

Page 49 Phantom PS2000
11.5.4 Transmitting an Individual Call
This feature allows the user to contact another vessel with a DSC radio. This
feature is similar to calling a vessel on CH16 and requesting to go to another
channel.
CMP25 RAM+ mic:
1. Press the [ CALL
(
SET
)
MENU
] key. The DSC Op-
eration menu will appear.
2. Press the [
] or [ ] key to select “
INDIVIDUAL ”
menu, then press the [ CALL
(
SET
)
MENU
] key. The
transceiver will beep, and the “Individual directory”
will appear. (To cancel, press the [
16/9
] key)
3. Press the [
] or [ ] key to select the “Individual”
you want to contact.
4. Press the [ CALL
(
SET
)
MENU
] key to transmit the
individual DSC signal.
5. After INDIVIDUAL CALL is transmitted, the trans-
ceiver will wait 8 seconds for the acknowledgment.
If the reply signal is not received, the transceiver will transmit again.
6. After the second INDIVIDUAL CALL is transmitted,
if the reply signal is not received, “ NO REPLY ” notition
will appear. To send the call again, press the [
]
key to select the “ SEND ,” then press the
[
CALL
(
SET
)
MENU
] key.
7. When an individual call acknowledgment is received,
the established channel is automatically selected and
a ringing tone sounds.
8. Press any key to listen to the channel to make sure it is not busy, then key
the microphone and call the other vessel you desire to communicate with.
VH-310 Handset:
1. Press the [ CALL
(
SET
)
MENU
] key. The DSC Op-
eration menu will appear.
2. Press the [
] or [ ] key to select “
INDIVIDUAL ”
menu, then press the [ CALL
(
SET
)
MENU
] key. The
transceiver will beep, and the “Individual directory”
will appear. (To cancel, press the [
16/9
] key)
3. Press the [
] or [ ] key to select the “Individual”
you want to contact.
4. Press the [ CALL
(
SET
)
MENU
] key to transmit the individual
DSC signal.