Standard Horizon PHANTOM Series PS2000, Owner'S Manual

Page: 21 / 84

Page 21 Phantom PS2000
KEY PAD
[
SCAN
] Key
Starts and stops scanning of programmed channels.
If held while the [
] or [ ] key is pressed, the radio will show the
channels programmed in scan memory. This function will not work if
the unit is scanning.
NOTE : The priority channel by default is Channel 16, however the
priority channel can be changed. To select a different priority channel
refer to section “
12.8 SCAN TYPE .”
[
CALL
(
SET
)
MENU
] Key
The [ CALL
(
SET
)
MENU
] key functions as the enter key.
Secondary use
Press the [ CALL
(
SET
)
MENU
] key to access the DSC OPERATION menu.
The “INDIVIDUAL CALL,” “GROUP CALL,” “ALL SHIP CALL,” “POSI-
TION REQUEST,” POSITION SEND,” STANDBY MODE,” and “CALL
WAITING” functions can be accessed from the DSC OPERATION menu.
Press and hold the [
CALL
(
SET
)
MENU
] key to access the RADIO SETUP
(refer ro section 12) or DSC SETUP menu (refer ro section 11).
[
DW
(
IC
)] Key
Watches for a transmission on CH16 and another selected channel until
either signal is received. (Dual watch)
Secondary use
Press and hold the [ DW
(
IC
)] key, intercom operation will operate be-
tween the two CMP25 RAM+ Microphones, if installed.
[
NAV
] Key
Press the [ NAV ] key, when connected to the GPS receiver, the LCD dis-
plays Position Information or Cruise Information from the GPS.
Secondary use
Press and hold the [ NAV
] key to access PA/FOG function menu.
[
WX
] Key
Immediately recalls the previously selected US NOAA weather channel
from any channel location.
Secondary use
Holding down the [ 16/9 ] key while pressing the [ WX ] key switch the Chan-
nel Group.
[
DISTRESS
]
KEY
Used to send a DSC Distress Call. To send the distress call refer to section
“
11.3.1. Transmitting a DSC Distress Call .”