Standard Horizon PHANTOM Series PS2000, Owner'S Manual

Page: 60 / 84

Phantom PS2000 Page 60
11.8 POSITION SEND
The feature is similar to Position Request, however instead of requesting a
position of another vessel this function allows you to send your position to an-
other vessel. Your vessel must have an operating GPS receiver connected for
the
Phantom PS2000 to send the position.
11.8.1 Setting up a Position Send Ringer
The PS2000 has the capability to turn off the Position Send ringer.
CMP25 RAM+ mic:
1. Press and hold down the [ CALL
(
SET
)
MENU
] key
until “ RADIO SETUP ” menu appears.
2. Press the [
] key to select “
DSC SETUP ” menu,
then press the [ CALL
(
SET
)
MENU
] key.
3. Press the [
] or [ ] key to select “
DSC BEEP ” menu,
then press the [ CALL
(
SET
)
MENU
] key.
4. Press the [
] or [ ] key to select “
POS SEND
”
menu, then press the [ CALL
(
SET
)
MENU
] key.
5. Press the [
] or [ ] key to select “
oF .”
6. Press the [ CALL
(
SET
)
MENU
] key to store the se-
lected setting.
7. To exit this menu and return to radio operation mode
press the [ 16/9
] key.
If you wish to return to enabling the ringer tone, just repeat the above proce-
dure, pressing the [
] or [ ] key to select “
on ” in step “5” above.
VH-310 Handset:
1. Press and hold down the [ CALL
(
MENU
)] key until
“
RADIO SETUP
” menu appears.
2. Press the [
] key to select “
DSC SETUP ” menu,
then press the [ ENT
] key.
3. Press the [
] or [ ] key to select “
DSC BEEP ” menu,
then press the [ ENT
] key.
4. Press the [
] or [ ] key to select “
POS SEND ”
menu, then press the [ ENT
] key.
5. Press the [
] or [ ] key to select “
oF .”
6. Press the [ ENT
] key to store the selected setting.
7. To exit this menu and return to radio operation mode
press the [ 16/9
] key.
If you wish to return to enabling the ringer tone, just repeat the above proce-
dure, pressing the [
] or [ ] key to select “
on ” in step “5” above.