Standard Horizon PHANTOM Series PS2000, Owner'S Manual

Page: 59 / 84

Page 59 Phantom PS2000
attached RAM+ or VH-310 handset.
7. Press the [
] or [ ] key to see the name and posi-
tion (LAT/LOG) of the vessel polled vessel.
8. If the Phantom PS2000 does not receive a reply,
the LCD will display “ NO REPLY .” Press the [
] key
and select “ SEND ” to transmit the call again or “ EXIT ”
to exit the Position Request mode.
NOTE
If the Phantom PS2000 does not receive position data
from the polled vessel, the LCD will show “
NO POSITION
DATA .”
11.7.3 Receiving a Position Request
When a position request call is received from another vessel, a ringing alarm
will sound and POS REQUEST will be show in the LCD. Operation and trans-
ceiver function differs depending on the setting of section “
11.7.1 Setting up
Position Reply .”
Automatically reply:
1. When a position request call is received, a calling alarm
sounds 4 times. Then requested position coordinates are
transmitted automatically to the vessel requesting your ves-
sels position.
2. To exit from position request display, press any key.
Manually reply:
1. When a position request call is received from an-
other vessel, “ RECEIVED POS REQUEST ” will ap-
pear on the LCD and a ringing alarm sounds 4 times.
2. Press the [
] key to see the MMSI of the vessel
transmitting the Position Request.
3 Select type of reply function “ SEND ” or “ NO REPLY ”
by using the [
] or [ ] key.
4. W h e n “ S E N D ” i s s e l e c t e d , p r e s s t h e
[
CALL
(
SET
)
MENU
] key on the
RAM+ mic. or [ ENT
] key on
the VH-310 Handset . And your position will be transmitted
to the requesting vessel.
5. To exit from position request display, press the [ 16/9
] key.