89
14.2.2 Changing the AIS Range
1. On the AIS screen, press one of the soft keys to show
the key selections.
2. Press the [
RANGE
] soft key. Press the soft keys at
the center and right side to select the radius range to
display on the AIS screen.
3. Press the [
BACK
] soft key to return to AIS screen.
NOTE
You may change the display range unit of the AIS screen, refer to section
”.
14.2.3 Transmitting an Individual Call to an AIS Ship
It is possible for the
GX2400
to transmit a DSC individual call to a received AIS
target by the procedure below:
1. On the AIS screen, press one of the soft keys to show
the key selections.
2. Press the [
TG LIST
] soft key to show a list of AIS
target being received.
3. Rotate the
DIAL/ENT
knob to select the MMSI number
(or vessel name). then press the [
SELECT
] soft key.
4. Press the [
CALL
] soft key
5. In the INTERSHIP CH list, rotate the
DIAL/ENT
knob
to select the operating channel on which you want to
communicate, then press the [
SELECT
] soft key. To
select operating channels from all voice channels,
press the [
MANUAL
] soft key.
6. To transmit an individual DSC call to the select AIS
ship, press the [
YES
] soft key.
Summary of Contents for GX2400GPS
Page 146: ......
