Standard Horizon GX2400GPS, Owner'S Manual

Page: 112 / 148

110
4. Rotate the DIAL/ENT knob to select “ CODE ”, then
press the [ SELECT ] soft key.
5. Rotate the DIAL/ENT knob to select the channel to
be scrambled, then press the [ SELECT ] soft key.
NOTE : CH16 and CH70 cannot be used.
6. Rotate the
DIAL/ENT
knob to select the scrambler
code. The scrambler code can be set from “ 00 ” to
“
03
” or “
OFF
” (While FVP-42 is selected in step 3,
the scrambler code can be set from “ 00 ” to “ 31 ” or
“
OFF
”). When “
OFF
” is selected the voice scrambler
is disabled.
7. Press the [ ENTER ] soft key to store the selected code.
8. Repeat steps 5 through 7 to set other channels.
9. Press the [ CLEAR ] key to return to radio operation.
17.14 SUMMARY OF THE CANNEL FUNCTION SETUP
Item Description Default Value Page
CHANNEL GROUP Selects the channel group (Depending on the
transceiver version)
31
WEATHER ALERT
(USA version only)
Turns the Weather Alert Function
ON or OFF
OFF 106
SCAN MEMORY Add or remove a channel from
Scan Memory
− 34
SCAN TYPE Select priority scan or memory
scan
PRIORITY 34
SCAN RESUME Sets the resume time of scanning 3 sec 106
MULTI WATCH Selects Dual Watch or Triple
Watch
DUAL 33
PRIORITY CHANNEL Selects a priority channel CH16 107
SUB CHANNEL Selects a Sub Channel CH09 107
CHANNEL NAME Edit the name of memory channels − 107
RX LED DIMMER
Adjusts the RX LED dimmer level 7
108
NOISE CANCEL Turns on or off of noise cancelling
function (independently available
for transmission and reception)
OFF 108
AF PITCH CONTROL Selects the audio filter operation NORMAL 109
SCRAMBLER* Configures the secret communi -
cation settings
TYPE: CVS2500
CORD: −
109
*( The voice scrambler function is not available with the factory default settings. Please
contact your dealer to activate the voice scrambler function.)