Standard Horizon GX2400GPS, Owner'S Manual

Page: 59 / 148

57
Automatic reply:
1. When an individual call is received, a ringing alarm
sounds.
The radio automatically switches to the requested chan -
nel. The display shows the MMSI of the vessel calling.
2. Press any key to stop the alarm.
3. Monitor the requested channel until the message is completed.
Press the microphone PTT switch and talk into the microphone to commu -
nicate with the vessel that initiated the individual call.
4. Press the [
QUIT
] soft key to return to radio operation.
NOTE
When there is an unread individual call, the “ ” icon will appear on the
display. You may review the unread individual call from the DSC log, refer
to section “ 11.10.2 Reviewing a Logged DSC RX Distress Alert and
acknowledgement ”.
11.4.6 Setting up the Individual Call Ringer
When an individual call is received the call ringer will sound for 2 minutes (default
setting). This selection allows the individual call ringer time to be changed.
1.
Press & hold [
]

“ DSC SETUP ”

“ INDIVIDUAL RING ”
2. Rotate the DIAL/ENT knob to select the individual call
ringing time.
3. Press the [ ENTER ] soft key to store the selected setting.
4. Press the [ CLEAR ] key to return to radio operation.
The GX2400 individual call ringer may be set to OFF:
1.
[Press & hold [ ]

“ DSC SETUP ”

“ DSC BEEP ”
2. Rotate the DIAL/ENT knob to select “ INDIVIDUAL
CALL ”, then press the [ SELECT ] soft key.