Standard Horizon GX2400GPS Owner'S Manual Download Page 118

Page: 118 / 148

116

19.4 TIME OFFSET

Sets the local time offset between UTC (Universal Time Coordinated) and local

time shown on the display. The offset is added or subtracted from the time

received from the GPS.

Refer to section “

8.8.1 Setting the GPS Time

” for details.

19.5 TIME AREA

This menu selection sets the display to show UTC time or local time with the offset.

Refer to section “

8.8.2 Setting the Time Area

” for details.

19.6 TIME FORMAT

This menu selection sets the display to show time in 12-hour or 24-hour format.

Refer to section “

8.8.3 Setting the Time Format

” for details.

19.7 UNITS OF MEASURE

This section sets the display units of speed, distance and altitude.

Press & hold [

]



“

GPS SETUP

”



“

UNIT OF MEASURE

”

2. Rotate the

DIAL/ENT

knob to select the item to be

set.

3. Press the [

SELECT

] soft key.

4. Rotate the

DIAL/ENT

knob to select the unit.

5. Press the [

ENTER

] soft key to store the new setting.

6. Press the [

CLEAR

] key to return to radio operation.

19.8 MAGNETIC VARIATION

This selection permits customization of the GPS COG (Course Over Ground)

indication on the normal and compass pages, and BRG on the waypoint page.

Refer to section “

8.8.4 Setting COG to True or Magnetic

” for details.

NOTE

Setting to “ON” is effective only when the RMC sentences with magnetic data

are input from external devices such as a GPS chart plotter.

Summary of Contents for GX2400GPS





















































































































































Search results

Summary of Contents for GX2400GPS

Reviews:

Related manuals for GX2400GPS

Brands by name

Popular brands

Standard Horizon GX2400GPS, Owner'S Manual

Search results

Summary of Contents for GX2400GPS

Reviews:

Related manuals for GX2400GPS

Brands by name

Popular brands