Standard Horizon GX2400GPS, Owner'S Manual

Page: 29 / 148

27
8.8 GPS CONFIGURATION
8.8.1 Setting the GPS Time
The transceiver shows GPS satellite time or UTC (Universal Time Coordinated)
time in factory default. A time offset is needed to show the local time in your
area. The time offset must be changed in order for the radio to display the
current time in your area.
1. Press and hold the [ MENU/SET ] key.
2. Rotate the DIAL/ENT knob to select “ GPS SETUP ”,
then press the [ SELECT ] soft key.
3. Rotate the DIAL/ENT knob to select “ TIME OFFSET ”,
then press the [ SELECT ] soft key.
4. Rotate the DIAL/ENT knob to select time offset of
your location. If “
00:00
” is assigned, the time is the
same as UTC or GPS satellite time.
5. Press the [ ENTER ] soft key to store the time offset.
6. Press the [ CLEAR ] key to return to radio operation.
8.8.2 Setting the Time Area
This menu selection allows the transceiver to show UTC time or local time
with the offset.
1. Press and hold the [
MENU/SET ] key.
2. Rotate the DIAL/ENT knob to select “ GPS SETUP ”,
then press the [
SELECT
] soft key.
3. Rotate the DIAL/ENT knob to select “ TIME AREA ”,
then press the [ SELECT ] soft key.
4. Rotate the DIAL/ENT knob to select “ UTC ” or
“ LOCAL ”.
5. Press the [ ENTER ] soft key to store the selected
setting.
7. Press the [ CLEAR ] key to return to radio operation.