Standard Horizon GX2400GPS, Owner'S Manual

Page: 101 / 148

99
16.6 LISTEN BACK
While in PA, FOG HORN, or HORN mode, toggle the listen back function
between ON and OFF.
1.
Press & hold [
]

“ CONFIGURATION ”

“ LISTEN BACK ”
2. Rotate the DIAL/ENT knob to select “ OFF ” or “ ON ”
(“ON” is default).
3. Press the [ ENTER ] soft key to store the selected
setting.
4. Press the [ CLEAR ] key to return to radio operation.
16.7 STATION NAME
This function allows you to change the name of the radio or second station
microphone.
1.
Press & hold [
]

“ CONFIGURATION ”

“ STATION NAME ”
2. With the second station microphone connected, rotate
the DIAL/ENT knob to select the unit to be named,
then press the [
SELECT
] soft key.
3. Rotate the
DIAL/ENT
knob to select to scroll through
the first letter of the new station name.
4. Press the [ SELECT ] soft key to store the first letter in
the name and step to the next letter to the right.
5. Repeat steps 3 and 4 until the name is complete. The
name can consist of up to ten characters, and if you
do not use all ten characters, select “→” to move to
the next space. This method can also be used to enter
a blank space in the name.
If a mistake was made entering in the station name, rotate the
DIAL/ENT
knob to select “←” or “→”, press the [ SELECT ] soft key until the wrong
character is selected, then perform steps 3 and 4.
6. When finished entering the station name (using ten characters or less),
press the [ FINISH ] soft key to advance to the second station name entry.
7. Rotate the DIAL/ENT knob to select “ SSM-70H ”, then
press the [ SELECT ] soft key.
8. Rotate the
DIAL/ENT
knob to select to scroll through
the first letter of the new station name.