Standard Horizon ECLIPSE DSC PLUS GX1150 Owner'S Manual Download Page 60

Page: 60 / 80

GX1150

Page 60

13 RADIO SETUP

13.1 LAMP ADJUSTING

Allows adjustment of the backlight intensity or to turn it off.

1. Press and hold down the

key until “

SETUP

” appears.

2. Press the

key, then select “

DIMMER

” in the “

RA-

DIO SETUP

” menu with the

keys.

3. Press the

key.

4. Press the

keys to select the desired level.

When “

OFF

” is selected, the lamp is extinguished.

5. Press the

key to store the selected level.

6. To exit this menu and return to radio operation

mode press the

key.

13.2 LCD CONTRAST

This selection sets up the display for best viewabilty for the varying mounting
locations (overhead or below).

1. Press and hold down the

key until “

SETUP

” appears.

2. Press the

key, then select “

CONTRAST

” in the

“

RADIO SETUP

” menu with the

keys.

3. Press the

key.

4. Press the

keys to select the desired level.

The contrast level can be set from “

” to “

”.

5. Press the

key to store the selected level.

6. To exit this menu and return to radio operation

mode press the

key.

Summary of Contents for ECLIPSE DSC PLUS GX1150

















































































Search results

Summary of Contents for ECLIPSE DSC PLUS GX1150

Reviews:

Related manuals for ECLIPSE DSC PLUS GX1150

Brands by name

Popular brands

Standard Horizon ECLIPSE DSC PLUS GX1150, Owner'S Manual

Search results

Summary of Contents for ECLIPSE DSC PLUS GX1150

Reviews:

Related manuals for ECLIPSE DSC PLUS GX1150

Brands by name

Popular brands