Standard Horizon ECLIPSE DSC PLUS GX1150 Owner'S Manual Download Page 53

Page: 53 / 80

Page 53

GX1150

9. If the

GX1150

does not receive a reply, the display

will be as shown in the illustration on the right. To
send again, press the

key.

NOTE

If the

GX1150

does not receive position data from the polled vessel, the

LCD will show “NO POSITION DATA.”

Manual Request

You may enter an MMSI number manually to contact without the Setting up the
Individual / Position Call Directory.

1. Press the

key. The “

DSC MENU

” will appear in

the display.

2. Press the

keys to select “

POS REQUEST

”.

3. Press

key to show the Position request direc-

tory. This directory uses the INDIVIDUAL Direc-
tory information.

4. Press the

keys to select the “

MANUAL

”,

then press the

key.

5. Press the

keys to scroll through num-

bers, 0-9. To enter the desired number and move
one space to the right press the

key. Repeat

this procedure until all nine space of the MMSI
number which you want to contact are entered.

6. If a mistake was made entering in the MMSI num-

ber repeat pressing the microphone’s

key until

the wrong number is selected, then press the
/

keys to correct the entry.

7. When finished entering the MMSI number, press

and hold the

key.

8. Press the

key to transmit the position request

DSC call.

9. When the

GX1150

receives the position from the

polled vessel, the

GX1150

will produce a ringing

alarm sound and the position from the polled ves-
sel is sent to a GPS Chart plotter via NMEA 0183.

Summary of Contents for ECLIPSE DSC PLUS GX1150

















































































Search results

Summary of Contents for ECLIPSE DSC PLUS GX1150

Reviews:

Related manuals for ECLIPSE DSC PLUS GX1150

Brands by name

Popular brands

Standard Horizon ECLIPSE DSC PLUS GX1150, Owner'S Manual

Search results

Summary of Contents for ECLIPSE DSC PLUS GX1150

Reviews:

Related manuals for ECLIPSE DSC PLUS GX1150

Brands by name

Popular brands