Page 55
GX1150
12.9 POSITION REPORT
The feature is similar to Position Request, however instead of requesting a
position of another vessel this function allows you to send your position to an-
other vessel. In order to send your position you need to have a GPS receiver
connected or to have manually input your position. See section “
12.11 MANUAL
INPUTTING OF THE GPS LOCATION
.”
12.9.1 Setting up a Position Report Ringer
The
GX1150
has the capability to turn off the Position Report ringer.
1. Press and hold down the
key until “
SETUP
MENU
” appears.
2. Press the
/
keys to select “
DSC
SETUP
” menu.
3. Press the
key, then select “
DSC BEEP
”
with the
/
keys.
4. Press the
key.
5. Press the
/
keys to select “
POSI-
TION REPORT
”.
6. Press the [
ENT
] key.
7. Press the
/
keys to select “
OFF
”.
8. Press the
key to store the selected setting.
9. To exit this menu and return to radio operation
mode press the
key.
To enable the Position Report Ringer, repeat the above
procedure, pressing the
/
keys to select “
ON
”
in step “7” above.
