Standard Horizon ECLIPSE DSC PLUS GX1150 Owner'S Manual Download Page 58

Page: 58 / 80

GX1150

Page 58

12.10 DSC TRANSMISSION TEST

Use the following procedure to ensure the DSC feature are functioning with
another DSC radio.

1. Press the

key. The “

DSC MENU

” will appear in

the display.

2. Press the

keys to select the “

DSC TEST

”.

3. Press the

key, then select the station (name or

MMSI number) to be sent the test signal with the

keys. This directory uses the Individual

Directory information.

4. If “Manual” is selected in the previous step, enter

the MMSI number (nine digits) which you want to
send the test signal to. To do this, press the

keys to scroll through numbers “0-9,” then

press the

key to move the entry location to the

right. If a mistake was made entering in the MMSI number, repeat pressing
the microphone’s

key until the wrong number is selected, then press

the

keys to correct the entry. When finished entering the MMSI

number, press and hold the

key.

5. Press the

key again to transmit the Test signal.

6. After the DSC TEST call is transmitted, the

GX1150

waits for a reply from the radio which was called,
the display will show “

WAIT FOR ACK

”.

7. When and acknowledgement call is received, the

GX1150

will produce a ringing sound and the dis-

play will show the bottom display to the right.

8. Press the

key to return the display to the radio

operation mode display.

Summary of Contents for ECLIPSE DSC PLUS GX1150

















































































Search results

Summary of Contents for ECLIPSE DSC PLUS GX1150

Reviews:

Related manuals for ECLIPSE DSC PLUS GX1150

Brands by name

Popular brands

Standard Horizon ECLIPSE DSC PLUS GX1150, Owner'S Manual

Search results

Summary of Contents for ECLIPSE DSC PLUS GX1150

Reviews:

Related manuals for ECLIPSE DSC PLUS GX1150

Brands by name

Popular brands