Standard Horizon ECLIPSE DSC PLUS GX1150 Owner'S Manual Download Page 63

Page: 63 / 80

Page 63

GX1150

13.6 SCAN TYPE

This selection selects the scan mode between “Memory Scan” and “Priority
Scan.”

1. Press and hold down the

key until “

SETUP

” appears.

2. Press the

key, then select “

SCAN TYPE

” in the

“

RADIO SETUP

” menu with the

keys.

3. Press the

key.

4. Press the

keys to select “

PRIORITY SCAN

”

or “

MEMORY SCAN

”.

5. Press the

key to store the selected setting.

6. To exit this menu and return to radio operation

mode press the

key.

13.7 KEY BEEP

(

ON/OFF

)

This section allows the level of the key beep to be adjusted or turned off.

1. Press and hold down the

key until “

SETUP

” appears.

2. Press the

key, then select “

KEY BEEP

” in the

“

RADIO SETUP

” menu with the

keys.

3. Press the

key.

4. Press the

keys to select desired beep

level.

5. Press the

key to set the key beep condition.

6. To exit this menu and return to radio operation

mode press the

key.

NOTE

Emergency alarm and beeps for DSC operation cannot be turned OFF.

Summary of Contents for ECLIPSE DSC PLUS GX1150

















































































Search results

Summary of Contents for ECLIPSE DSC PLUS GX1150

Reviews:

Related manuals for ECLIPSE DSC PLUS GX1150

Brands by name

Popular brands

Standard Horizon ECLIPSE DSC PLUS GX1150, Owner'S Manual

Search results

Summary of Contents for ECLIPSE DSC PLUS GX1150

Reviews:

Related manuals for ECLIPSE DSC PLUS GX1150

Brands by name

Popular brands