ASSEMBLY INSTRUCTIONS
7
STEP 3
Connect the
UPPER CONNECTION WIRE(24)
in the
RIGHT UPRIGHT(4)
to the
BASE CONNECTION
WIRE(23),
then attach the
RIGHT UPRIGHT(4)
to the
FRONT BASE(2)
with the
NYLOCK NUTS(M8x1.25)
(114).
Do not tighten the nuts until STEP 8.
STEP 4
Attach the
LEFT UPRIGHT(3)
to the
FRONT BASE(2)
with the
NYLOCK NUTS(M8x1.25)(114).
Do not
tighten the nuts until STEP 8.
STEP 5
Refer to the illustration. Insert the
LONG SHAFT(53)
through the hole in the
RIGHT UPRIGHT(4), RIGHT
PIVOTING ARM(46), SPACER TUBE(48), LEFT PIVOTING ARM(45)
and
LEFT UPRIGHT(3),
then secure
with
LARGE WASHERS(55), SECURING CAPS(54),
and
SOCKET HEAD BOLTS(M8x1.25x25mm)(103)
on both sides. Do not tighten the bolts until STEP 8.
For shipping purposes, the
NUT CAPS(122)
and
NYLOCK NUTS(M8x1.25)(114)
are attached on
the
FRONT BASE(2).
Remove the
NUT CAPS(122)
from the
FRONT BASE(2)
and keep them for
Assembly STEP 12. Remove the
NYLOCK NUTS(M8x1.25)(114)
for the following assembly.
NOTE:
Keep the NUT CAPS(122)
for Assembly STEP 12.
