Stamina 55-6510A, Owner'S Manual

Page: 6 / 38

171 Bolt, Hex Head (M8 x 1.25 x 15mm) 8
339 Large Washer (M12 x ø45 x 3mm thick) 6
341 Washer (M12 x ø24 x 2mm thick) 2
Part Number and Description Qty
80 Carriage Bolt (M12 x 1.75 x 85mm) 2
158 Bolt, Button Head (M10 x 1.5 x 110mm) 2
This chart is provided to help identify the hardware used in the assembly process. Place the washers or
the ends of the bolts or screws on the circles to check for the correct diameter. Use the small scale to
check the length of the bolts and screws.
NOTICE: The length of all bolts and screws, except those with flat
heads, is measured from below the head to the end of the bolt
or screw. Flat head bolts and screws are measured from the
top of the head to the end of the bolt or screw.
length
length
After unpacking the unit, open the hardware bag and make sure that you have all the following items.
Some hardware may be already attached to the part.
163 Screw, Flange Round Head (M4 x 35mm) 4
HARDWARE IDENTIFICATION CHART
6
mm.
in.
INCHES
MILLIMETERS
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
0 1/2 1 1/2 2 1/2 3 1/2 4 1/2 5 1/2 6
6 8 10 12
3/16" 1/4" 5/16" 3/8" 1/2"
149 Bolt, Button Head (M6 x 1 x 35mm) 4
154 Bolt, Button Head (M10 x 1.5 x 35mm) 4
156 Bolt, Button Head (M10 x 1.5 x 65mm) 2
157 Bolt, Button Head (M10 x 1.5 x 70mm) 6
159 Bolt, Button Head (M12 x 1.75 x 75mm) 2
179 Washer (M10 x ø23 x 2mm thick) 20
146 Bolt, Button Head (M6 x 1 x 12mm) 12
147 Bolt, Button Head (M6 x 1 x 15mm) 4
189 Nylock Nut (M10 x 1.5) 6
190 Nylock Nut (M12 x 1.75) 2
143 Bolt, Socket Head (M12 x 1.75 x 80mm) 2