24
TROUBLE SHOOTING GUIDE
Bolt End
Bolt End
4.
5.
A
C
D
B
ROPE(212) REPLACEMENT (Continue)
5. Refer to detail view 4. Insert the
BUNGEE CORD(42)
through all of the
WEIGHT PLATES(40)
and hook to the Bolt End of the new
ROPE(212).
Pull the
ROPE(212)
up through the
WEIGHT
PLATES(40)
with the
BUNGEE CORD(42).
Refer to detail view 5. Screw the Bolt End of the
ROPE(212)
into the bottom end of the
SELECTOR ROD(8).
NOTE:
Hold the
ROPE(212)
at the position right next to its Bolt End, so the
ROPE(212)
will not rotate
when screwing the Bolt End into the
SELECTOR ROD(8).
6. Disconnect the
ROPE(211)
from the
RIGHT LOWER SWIVEL BRACE(17).
7. Refer to the illustration. Route the
ROPE(212)
around the
PULLEY(203)
at (A) and the
PULLEY(202)
at (B). Connect the
ROPE(212)
to the
BUNGEE CORD(42).
Route the
BUNGEE CORD(42)
around
the
PULLEY(202)
at (C). Pull the
BUNGEE CORD(42)
down and connect to the hook on the
UPRIGHT FRAME(11)
at D.
Summary of Contents for 55-6510A
Page 28: ...PRODUCT PARTS DRAWING 28 BACK...
Page 29: ...29 FRONT...
Page 36: ...NOTES 36...
Page 37: ...NOTES 37...
