ASSEMBLY INSTRUCTIONS
7
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com to the Services section and order the part needed, e-mail
us at [email protected], or call us toll free at 1-800-375-7520 (in the U.S.). Our
Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central Time) Monday
through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
STEP 1
Insert the
PEDAL SHAFT(21)
through holes located on the front end of the
CENTER BEAM(1).
Place
a
SPACER(22)
and a
PEDAL(23)
onto each end of the
PEDAL SHAFT(21)
and slide them toward the
CENTER BEAM(1).
Then secure the
PEDALS(23)
with
WASHERS(M10)(58), LOCK WASHERS (M10)
(56),
and
ACORN NUTS(M10x1.5)(53)
at both sides of the
PEDAL SHAFT(21).
NOTE:
You need to use two wrenches to tighten the
ACORN NUTS(M10x1.5)(53)
at both ends of the
PEDAL SHAFT(21)
at the same time.
STEP 2
Insert the
PEDAL STRAPS(24)
into the slots in the bottom of the
PEDALS(23).
When feet are in the
PEDALS(23),
the ends of the
PEDAL STRAPS(24)
will be facing away from the
CENTER BEAM(1)
as
shown above.
