1. To store the
1215 Orbital Rower,
simply keep it in a clean dry place.
2. Fold The
REAR SUPPORT(16)
for easy storage, refer to page 11.
3. Grasp the Front and Rear Stabilizer to move the
1215 Orbital Rower.
Do not use the Seat to move
the
1215 Orbital Rower.
The Seat will move and the Seat Carriage may pinch your hand or fingers.
4. To avoid damage to the electronics, remove the batteries before storing the
1215 Orbital Rower
for
one year or more.
The safety and integrity designed into the
1215 Orbital Rower
can only be maintained when the
1215
Orbital Rower
is regularly examined for damage and wear. Special attention should be given to the
following:
1. Pull on the
HANDLEBARS(8, 9)
and verify that the
SHOCKS(14)
provide tension. The
SHOCKS(14)
should provide many years of use.
2. Clean the roller tracks in the
CENTER BEAM(1)
with an absorbent cloth.
3. Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts.
Tighten loose nuts and bolts.
4. Verify that the
CAUTION LABEL(60)
is in place and easy to read. Call Stamina Products immediately
at
1-800-375-7520
for a replacement
CAUTION LABEL(60)
if it is missing or damaged.
5. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
6. Worn or damaged components shall be replaced immediately or the
1215 Orbital Rower
removed
from service until repair is made.
7. Only Stamina Products supplied components shall be used to maintain/repair the
1215 Orbital
Rower.
8. Keep your
1215 Orbital Rower
clean by wiping it off with an absorbent cloth after use.
STORAGE
MAINTENANCE
13
