ASSEMBLY INSTRUCTIONS
8
NOTE:
Lay your partially assembled
1215 Orbital Rower
upside down to complete STEP 3 and 4.
STEP 3
Place the
LEFT
and
RIGHT BASE FRAMES(2, 3)
on the
CENTER BEAM(1),
connect them with the two
MOUNTING BRACKETS(4),
and secure with
HEX BOLTS(M8x1.25x16mm)(43)
and
LOCK WASHERS(M8)
(55).
STEP 4
Attach the
REAR SUPPORT(16)
to the
SUPPORT BRACKET(15)
with
HEX BOLT(M10x1.5x95mm)(46)
and
NYLOCK NUT(M10x1.5)(52).
Lock the
REAR SUPPORT(16)
in position by inserting the
PULLING
PIN(17)
through the holes in the
SUPPORT BRACKET(15)
and
REAR SUPPORT(16).
