ASSEMBLY INSTRUCTIONS
8
STEP 4
NOTE:
The
RIGHT PEDAL(17)
has
R
stamped on the end of the pedal shaft. The
RIGHT PEDAL(17)
has
right hand threads and is tightened by turning clockwise. The
LEFT PEDAL(16)
has
L
stamped on
the end of the pedal shaft. The
LEFT PEDAL(16)
has left hand threads and is tightened by turning
counterclockwise.
Thread the
RIGHT PEDAL(17)
into the
RIGHT CRANK(13)
as shown. Tighten the pedal securely. Do the
same to attach the
LEFT PEDAL(16)
to the
LEFT CRANK(12).
STEP 5
Pull the
ADJUSTMENT KNOB(48),
then insert the
HANDLEBAR(2)
into the
MAIN FRAME(1)
and secure
with the
ADJUSTMENT KNOB(48).
NOTE:
The pin of the
ADJUSTMENT KNOB(48)
should be inserted into one of the adjustment holes in
the
HANDLEBAR(2).
And the
ADJUSTMENT KNOB(48)
should be screwed in tight to make the
HANDLEBAR(2)
fits securely in the
MAIN FRAME(1).
