Stamina 0890 Air Bike, Owner'S Manual

Page: 8 / 22

ASSEMBLY INSTRUCTIONS
Push PEDAL BUSHINGS(37), with SHOULDER facing outside, into LINKAGE CONNECTORS(39).
Insert PEDAL SHAFTS of PEDALS(82, 83) through SHOULDER side of PEDAL BUSHINGS(37).
Slide SPACERS(84) onto PEDAL SHAFTS.
WARNING: SPACER(84) must be between PEDAL BUSHING(37) and CRANK(9) so that there will be
enough clearance between LINKAGE(8) and CRANK(9).
Thread PEDAL SHAFTS of PEDALS(82, 83) into CRANK(9) and tighten.
Hold PEDAL SHAFTS and thread THIN NUTS(1/2")(41) onto PEDAL SHAFTS.
Tighten PEDAL SHAFTS and THIN NUTS(1/2")(41) until THIN NUTS(1/2")(41) are tight against CRANK(9).
Connect the LINKAGES(8) to the LINKAGE CONNECTORS(39) with the LOCKING PINS(40).
a.
b.
c.
d.
e.
f.
g.
The
RIGHT PEDAL(83)
has
R
marked on the bottom side of the pedal. The
LEFT PEDAL(82)
has
L
marked on the bottom side of the pedal. Both
PEDALS(82, 83)
have RIGHTHAND
THREADS. Tighten both
PEDALS(82, 83)
by turning clockwise.
STEP 8
NOTE:
IMPORTANT
STUDY THE ABOVE ILLUSTRATION AND READ ALL OF STEP 8 "a" through "g"
BEFORE ATTACHING PEDALS AND CONNECTING LINKAGES.
STEP 9
Open the
MONITOR(53)
to Install two AA batteries. Run the
SPEED PICKUP WIRE(24)
through the
hole on the Back Cover of the
MONITOR(53)
and plug into the
MONITOR(53).
Insert
MONITOR(53)
into the Back Cover. Attach the
MONITOR(53)
to the
BRACKET(52)
on the
MAIN FRAME(1).
8