Stamina 0890 Air Bike, Owner'S Manual

Page: 11 / 22

ADJUSTMENT INSTRUCTIONS
11
Chain Adjustment
Chain Adjustment required if the Chain is too loose.
Loosen
ACORN NUTS(3/8")(70)
on both sides of the fan.
Adjust the
NYLOCK NUT(M6)(67)
on the chain side of
bike to remove all slack from the chain.
Adjust the
NYLOCK NUT(M6)(67)
on the side opposite
the chain so that the center of the
ACORN NUT(3/8")(70)
is the same distance from
TENSION BRACKET(23)
on
both sides of bike.
Tighten the
ACORN NUTS(3/8")(70)
on both sides of the
fan.
1.
2.
3.
4.
Fan Adjustment
Fan Adjustment is required if the fan locks up or the resistance of the fan increases after use. To
adjust the fan, use the following procedures:
STEP 1:
STEP 3:
STEP 2:
STEP 4:
Remove the
SCREWS
holding the
CHAIN GUARDS(33, 34)
and
WIRE CAGES(31, 32)
to the
BIKE.
Remove the
ACORN NUTS(3/8")(70), EYE BOLTS(22),
and
NYLOCK NUTS(M6)(67)
from the
AXLE.
Slide the
FAN(17)
towards the
REAR
and slide
CHAIN(16)
off both the
FRONT
and
REAR
SPROCKETS.
Remove the
FAN(17)
and
WIRE CAGES(31, 32)
from the
BIKE.