EN
In caseof exceeding the maximum angle of entry of the trolley into the oven, there is the possibility of spills of
hot liquids that canlead to burns.
3. STARTING UP THE UNIT
To start up and install the unit appropriately, please follow the points in the “
DOCUMENT FOR INSTALLING AND STARTING UP
SMART UNITS
”, included in the bag together with this instruction manual.
Remember that any fault or breakage resulting from improper installation or starting up, will make the warranty become null
and void.
1.
Electrical connection
Before connecting the unit to the power supply, check that the electrical grid characteristics match those described in the
techni- cal characteristics of each unit. The electrical installation must be performed by authorised technicians and meet the
regulations in force.
Preferably, the electrical connection should be performed by mounting and electrical outlet (NOT INCLUDED) of
appropriate type and capacity for the maximum current absorbed by the oven phases. If not possible, it could be directly
connected to the circuit breaker on the electrical control board.
Next, the types of recommended electrical connections are described:
1. Three phase connection 400V directly connected to a circuit breaker.
WYŁĄCZNIK
BREAKER
CIRCUIT BREAKER
-28-
