EN
•
Selecting the temperature set point of the core probe (only possible with core probe cooking modes and DeltaT
(ΔT):
6.
Press the icon
,and next, press icons
or
(or move the scroll bar) to select the temperature
value wanted. Press
again to confirm the value selected.
•
Selecting the phase time (only possible with time-controlled cooking mode)
7.
Press the icon
and next, press icons
or
(or move the scroll bar) to select the time value wan-
ted. Press
again to confirm the value selected.
•
Selecting the DeltaT
(ΔT)
value (only possible with
ΔT
cooking mode):
8.
Press the icon
,and next, press icons
or
(or move the scroll bar) to select the temperature
value wanted. Press
again to confirm the value selected.
•
Selecting the value for the humidity percentage (only possible with vapour or combi cooking and
with any of the three cooking modes):
9.
Press the icon
and next, press icons
or
(or move the scroll bar) to select the humidity percen-
tage wanted. Press
again to confirm the value selected.
•
Selecting the fan speed (with anytype or modeof cooking):
10.
Press the icon
,and next, press icons
or
(or move the scroll bar) to select the speed percen-
tage wanted. Press
again to confirm the value selected.
•
Selecting the opening time of the vapour valve
11.
The time value can only be selected at time-controlled cooking mode. In all the other modes, only the
opening or closing can be selected at the time the user wants. To do so, press the icon
and next,
press icons
or
(or move the scroll bar) to select the time value wanted if at the time-controlled
cooking mode, or opening/closing if at the modes for core probe cooking or Delta T
(ΔT).
Press
again
to confirm the value or state selected.
•
Adding aphase to the cooking cycle:
12.
Press the icon
to add a new phase to the cooking cycle, up to a maximum of 6 phases. Toset the rest
of options within each phase, repeat the steps above. Press icons
or
.to select the cooking phase
wanted and previously created. Press
to delete an unwanted cooking phase..
B. Starting acooking cycle
1. Set the cooking cycle wanted (see point 6.4.1“Setting the cooking cycle”).
2. To continue, press
to have a summary of the set recipe displayed. Next, press the icon
to start the preheating
cycle, if this option has been selected. The door opening and closing will stop the preheating operation (if selected) and the
start of the 1st phase of the cooking cycle.The opening of the vapour valve can be modified during the cooking process by
pressing the icon
.In this way, its opening will switch to manual mode.
3.
Press the icon
,to switch the lamp inside the cooking chamber on or off.
4.
Press the icon
to have all the values of the process variables and the state of the oven
components displayed on the screen
To do so, the user should have a key, which is only accessible for the maintenance service.
6.
8.
7.
10.
11.
9.
12.
4.
-35-
3.
