Stairville Tri Flat PAR Profile User Manual Download

Page: 11 / 56

DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not

within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from

the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.

DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never

remove any covers.
There are no user-serviceable parts inside.
Do not use the device if covers, protectors or optical components are missing or

damaged.

Safety

Safety instructions

Tri Flat PAR Profile 18x3W RGB

Summary of Contents for Tri Flat PAR Profile

























































Search results

Summary of Contents for Tri Flat PAR Profile

Reviews:

Related manuals for Tri Flat PAR Profile

Brands by name

Popular brands

Stairville Tri Flat PAR Profile, User Manual

Search results

Summary of Contents for Tri Flat PAR Profile

Reviews:

Related manuals for Tri Flat PAR Profile

Brands by name

Popular brands