A preprogrammed automatic show can only be activated when the unit is working alone or as
Master in a Master / Slave combination. This setting is only relevant when the unit is not DMX-
controlled.
Press
[Mode]
repeatedly until the display shows
‘Pr.xx’
. Now you can select one of the preprog‐
rammed automatic shows. Use
[Up]
and
[Down]
to select a value between
‘Pr.01’
and
‘Pr.09’
.
Settings for programme 01:
For
‘Pr.01’
, you can choose from 10 predefined colours or blackout. Press
[Setup]
. Use
[Up]
and
[Down]
to select one of the colours (display shows
‘1.__r’
to
‘09.-on’
) or blackout (display
shows
‘0.OFF’
).
To adjust the strobe frequency, press
[Setup]
again. The display shows
‘FS.xx’
. Now use
[Up]
and
[Down]
to select a value between
‘FS.00’
(slow) and
‘FS.99’
(fast).
Settings for programme 02 to 09:
To set the programme speed, press
[Setup]
again. The display shows
‘SP.xx’
. Now use
[Up]
and
[Down]
to select a value between
‘SP.01’
’ (slow) and
‘SP.FL’
(fast).
To adjust the strobe frequency, press
[Setup]
again. The display shows
‘FS.xx’
. Now use
[Up]
and
[Down]
to select a value between
‘FS.00’
(slow) and
‘FS.99’
(fast).
Operating mode ‘Preprog‐
rammed automatic show’
Operating
Tri Flat PAR Profile 18x3W RGB
33
Summary of Contents for Tri Flat PAR Profile
