Stairville Tri Flat PAR Profile, User Manual

Page: 45 / 56

A constant colour can only be activated when the unit is operating alone or as master in a
master-slave combination. This setting is only relevant if the device is not controlled via DMX.
Press
[MANUAL] . Now you can either call up a predefined colour directly with one of the col‐
oured buttons, or mix a colour individually from the basic colours.
Press
[R] , [G] or [B] to mix a colour individually from the basic colours. The display shows ‘r.xxx’ ,
‘G.xxx’ or ‘b.xxx’ .
Use [%] , [+] and [–] to set the colour intensity:
Display Description
‘r.000’ … ‘r.255’ Red
‘G.000’ … ‘G.255’ Green
‘b.000’ … ‘b.255’ Blue
Press [BLACKOUT] to switch the LEDs off or on again. Then the unit continues to operate in the
last selected operating mode.
The Blackout function is only available when the unit is not controlled via DMX.
Constant colour
Blackout
Operating
Tri Flat PAR Profile 18x3W RGB
45